Proud Plum

Proud Plum is latex dress made for a photo session with the upcoming shooting star Victoria van Violence, a beautiful and talented model from Frankfurt/Germany.

The dress is solely made from 0.35mm plum colored latex. The two front parts overlap over the chest and close behind the neck with the help of a couple of snap fasteners. A zipper is assembled on the back to help dressing.

The front parts form a beautiful bust and give some insight between (You will know what I mean, when I 'll show you some pictures within the next days).

You can find a basic pattern file (PDF and SVG) to download on the pattern page.

When working with this pattern, take care to adjust the length of all parts to your needs (they are not aligned in the pattern file). Proud Plum is a little bit shorter on the front than on the back. Also take the width of the ruffles (cut from 5cm wide latex rings) into account.

I added small victorian cut trimmings to most of the seams (see on second image) and edges.

Cruel Cobald China

This creation took quite some time to finish.

Cruel Cobal China is based on an idea by JeyOh Photography to transfer the patterns of the widely known Blue Onion Porcelain (the German name is "Zwiebelmuster") to a set of latex undies.

The basic ornaments are always similar and represent a couple of Chinese flowers and fruits with individual meanings. Here's a brief history of the design in case you are interested.

I extracted the patterns from a photo and vectorized them using inkscape (find the SVG and PDF on the pattern page). Then I transfered the patterns (or parts of them) to adhesive labels, stuck them onto 0,35mm blue latex and cut them out using my small scissors. The pieces then were glued to the panties made from 0,35mm white latex.

I also attached a shell cut trimming along the edge to finish the look.

We are currently looking for models to shoot this design.

Strawberry Fields Explained

A couple of people asked me for some details about the "Strawberry Fields" underwear worn by Miss Tschirhart.

I used 0.35mm 4D latex in the colors scarlet red and jade green for this creation.

The ruffles are made from small circles (outer diameter 12cm, inner diameter 8cm) with the outer edge cut with a small wave form rotary cutter.

The trimming is cut with a large wave form cutter.

All hearts are cut by hand. Four bows are glued to the panties and two to the top.

The top also has two hidden loops (behind the bows) where an optional neck holder can be attached.

The pattern can be found on the pattern page.

Victorian Babe Lingerie

So, here are some quick shots of the new Victorian Babe set of latex underwear.

The garments are made of 0.35mm baby pink latex with a 0.35mm white trim that was cut with a victorian rotary blade.

I also added two white bows and an adjustable neck holder to the bra.

You certainly notice that the cup size of the bra does not really match the mannequin's one. Btw, I am looking for a model in the Rhine-Main-Area (see my Modelmayhem page for further details).

The pattern can be found on the pattern page (look for "Purple Undies (Panties and Bra)").

Imperial Pasties

These pasties are made from 0.35mm white and black latex.

The interesting part was the creation of the pattern of the pasties as I had to transform the imperial emblem into the surface of a cylinder (aka pacman).

The imperial emblem is a regular hexagon, so I cut the emblem into 12 pieces and removed 3-4 degrees from each to create the final pattern.

I transfered that pattern to the white latex and cut it with my scissors, glued the white onto the black latex and cut the outline leaving a small overlap for glueing the pasties.

Here is the pattern for the pasties: [SVG] [PDF]

[Copyright note: the imperial emblem is (c) Lucasfilm, Ltd. No copyright infringement is intended. The use of the emblem in this post is only for sake of education and scholarly analysis. I will not sell any items containing copyrighted material from Lucasfilm or others. If Lucasfilm will ask me to remove this post and all images showing the imperial emblem, I will do so immediately.]

Oh Boy!

At first I have to apologize for the bad quality of the image. I don't have a male model (neither mannequin nor human) available at the moment, but I hope I can add a customer action shoot later.

These shorts are cut from 0.35mm light blue latex with a trim of 0.35mm white latex.

The shorts are made of 5 pieces (besides the trim): 2 side parts (glued together on the back), 2 ballbag parts and a small trapezoid crotch piece.

The pattern is available for download (SVG and PDF) on the pattern page.

Lace Garter Belt

This garter belt is a sequel to my experiments with self made latex lace. The back and side parts are made from 0.4mm purple latex. The front part is created from a piece of net lace that I put onto a glass surface and soaked it with transparent liquid latex. The glass side gets really smooth and shiny when oiled.

The trims are cut from 0.25mm black latex with a rotary cutter with a special blade that cuts a wave form.

I have uploaded the pattern to the pattern page.

Bubblegum Combination and Pirate Skirt

I have been busy lately with some non-latex business, but I also finished a made-to-measure set of bubblegum lingerie: panties, bra and a pirate mini skirt.

The panties are basically another variant of the Polka Dot Zipper Panties, made of 0.35mm bubblegum latex with ruffles made of 0.25mm thick black latex rings.

[side note: the problem with Monique is that her mannequin body is not responsive to the soft and shaping tension of the latex garment, a real rubbergirl would benefit from. I hope, I can show you some live shots later.]

The bra is made of the same material with 10mm wide and 0.6mm thick latex shoulder straps. To allow the adjustment of the shoulder straps I added black plastic rings and sliders to the back.

The pattern files for both panties and bra can be found on my pattern page.

The pirate mini skirt is an additional garment that can be worn on top of the panties. On the photo you can still see a small band of the bubblegum latex and the panties' ruffles.

The skirt itself is made of a 40mm wide band of 0.25mm black latex with long ruffles made of the same material. The ruffles are created from two circles. The inner diameter of these circles is about 13cm (circumference of skirt divided by 2 times π) and the outer is about 40cm (inner diameter plus 2 times the desired length).

I also attached a small skull and bones applique cut from 0.35mm white latex (I found the same skull and bones theme on a lot of different web sites without any information on copyright. I hope I did not infringe the authors rights.).

I have also uploaded the mini skirt pattern to the pattern page.

Polka Dot Zipper Panties

I created these panties from white latex and attached an invisible zipper, black polka dots, black ruffles and some bubblegum trims.

Pattern download

• SVG
• PDF (large)
• PDF (tiled to A4)

Instructions

1. For the panties I cut out a front and two identical (mirrored) back parts from asheet of 0.35mm white latex. The back seam has a concave form to allow the curve along bottom and crotch.
2. I soaked the tape of the 22cm long white invisible zipper with transparent liquid latex (latex does not stick to anything but itself). Latex milk will also do. To avoid a stained look when the zipper is applied to the latex, I soaked it from the front side first, and then (after drying) again from the back. The texture of the zipper tape will still be visible when glued (at least through thinner latex), so avoid any irregularities and do not soak the zipper's teeth. Latex Kitty has a tutorial on glueing zippers.
3. Then I glued both back parts to the zipper tape and reinforced its back with two small latex strips (a little wider than the tape). I also closed the upper part of the back seam above the zipper with a strip of white latex.
4. After the zipper was attached and reinforced, I glued both side seams, but not the crotch to front seam.
5. For the polka dots I cut out about 20 black latex circles of about 3.5cm diameter, cleaned them (and the panties), applied the glue (only to the backside of the circles, not to the panties) and attached them. Finally I cut away overlapping circle parts.
6. For the ruffles I cut out 8 rings of black latex with an inner diameter of 8cm and an outer diameter of 12cm. This gives 2cm wide rings for 2cm wide ruffles that can be glued (after cutting open) to the outer rim of the panties. Again Latex Kitty has a tutorial on making ruffles.
7. I attached a 5mm wide bubblegum trim and two small bows along the ruffle seams
8. Finally I glued the crotch to the front part (from behind). 

Pattern Download

I'm currently considering to upload all my patterns and include the download links here in the blog. I usually create my patterns on paper or plastic film and transfer them to SVG with Inkscape. A small script generates A4 tiles from that. These tiles can be printed on an ordinary printer and glued together.

Here are the pattern files for Almrausch Intermezzo:

• SVG
• PDF (large)
• PDF (tiled to A4)

What do you think? Is this useful? Shall I publish more of my patterns? Can you print them without problems? Please comment.