rogueFIVEphoto shot Miss Kiddekat wearing zitronenröllchen latex bra and polka dots skirt
Showing posts with label Skirt. Show all posts
Showing posts with label Skirt. Show all posts
Thursday, June 14, 2012
Saturday, October 30, 2010
Bubblegum Combination and Pirate Skirt
I have been busy lately with some non-latex business, but I also finished a made-to-measure set of bubblegum lingerie: panties, bra and a pirate mini skirt.
The panties are basically another variant of the Polka Dot Zipper Panties, made of 0.35mm bubblegum latex with ruffles made of 0.25mm thick black latex rings.
[side note: the problem with Monique is that her mannequin body is not responsive to the soft and shaping tension of the latex garment, a real rubbergirl would benefit from. I hope, I can show you some live shots later.]
The bra is made of the same material with 10mm wide and 0.6mm thick latex shoulder straps. To allow the adjustment of the shoulder straps I added black plastic rings and sliders to the back.
The pattern files for both panties and bra can be found on my pattern page.
The pirate mini skirt is an additional garment that can be worn on top of the panties. On the photo you can still see a small band of the bubblegum latex and the panties' ruffles.
The skirt itself is made of a 40mm wide band of 0.25mm black latex with long ruffles made of the same material. The ruffles are created from two circles. The inner diameter of these circles is about 13cm (circumference of skirt divided by 2 times π) and the outer is about 40cm (inner diameter plus 2 times the desired length).
I also attached a small skull and bones applique cut from 0.35mm white latex (I found the same skull and bones theme on a lot of different web sites without any information on copyright. I hope I did not infringe the authors rights.).
I have also uploaded the mini skirt pattern to the pattern page.
The panties are basically another variant of the Polka Dot Zipper Panties, made of 0.35mm bubblegum latex with ruffles made of 0.25mm thick black latex rings.
[side note: the problem with Monique is that her mannequin body is not responsive to the soft and shaping tension of the latex garment, a real rubbergirl would benefit from. I hope, I can show you some live shots later.]
The bra is made of the same material with 10mm wide and 0.6mm thick latex shoulder straps. To allow the adjustment of the shoulder straps I added black plastic rings and sliders to the back.
The pattern files for both panties and bra can be found on my pattern page.
The pirate mini skirt is an additional garment that can be worn on top of the panties. On the photo you can still see a small band of the bubblegum latex and the panties' ruffles.
The skirt itself is made of a 40mm wide band of 0.25mm black latex with long ruffles made of the same material. The ruffles are created from two circles. The inner diameter of these circles is about 13cm (circumference of skirt divided by 2 times π) and the outer is about 40cm (inner diameter plus 2 times the desired length).
I also attached a small skull and bones applique cut from 0.35mm white latex (I found the same skull and bones theme on a lot of different web sites without any information on copyright. I hope I did not infringe the authors rights.).
I have also uploaded the mini skirt pattern to the pattern page.
Tuesday, September 14, 2010
Bubblegum Polka
This pencil skirt is another custom made to measure creation. I used a thinner (0.25mm) latex sheeting this time for the skirt and the ruffles.
The polka dots are hand-cut from 0.35mm white latex. I used the cone of an aerosol spray to draw about 40 circles and cut them out with my rotary cutter. To glue them onto the skirt I cleaned both the skirt and the circles, but applied the latex glue only to the backside of the circles.
I added a 5mm wide black trim to the bottom of the ruffles and a 5mm wide trim of bubblegum colored latex onto the seam of skirt and ruffles.
As an eye catcher I glued four little bubblegum bows to the trim. Latex Kitty has an excellent tutorial about making bows (and there is almost always some trim leftover).
For the waistband I used black elastic lace which I partly soaked with liquid black latex and glued it to the skirt with a 10mm wide bubblegum latex trim.
Bubblegum is a fantastic color, it reminds me of the bubble gum Hubba Bubba. I got the bubblegum latex from Heinz at Latexlabor in Frankfurt, in case you also want some.
The polka dots are hand-cut from 0.35mm white latex. I used the cone of an aerosol spray to draw about 40 circles and cut them out with my rotary cutter. To glue them onto the skirt I cleaned both the skirt and the circles, but applied the latex glue only to the backside of the circles.
I added a 5mm wide black trim to the bottom of the ruffles and a 5mm wide trim of bubblegum colored latex onto the seam of skirt and ruffles.
As an eye catcher I glued four little bubblegum bows to the trim. Latex Kitty has an excellent tutorial about making bows (and there is almost always some trim leftover).
For the waistband I used black elastic lace which I partly soaked with liquid black latex and glued it to the skirt with a 10mm wide bubblegum latex trim.
Bubblegum is a fantastic color, it reminds me of the bubble gum Hubba Bubba. I got the bubblegum latex from Heinz at Latexlabor in Frankfurt, in case you also want some.
Sunday, August 29, 2010
Lemongreen pencil skirt
This pencil skirt was created of 0.35mm lemongreen latex (from Blackstyle) with small 0.5mm wide contrasting edges of neon pink latex. The skirt is made to measure for one of my customers.
For the creation I measured the circumferences of her body from the belly down to the knees (letting some room to allow walking) and divided each length by 4. Then I reduced the front seams by 5mm on each side at the hip and added that amount to the rear parts to give some extra space for the backside. These adjustments gave the skirt a perfect fit (you cannot see that on the photo, where the skirt is worn by Monique, not the customer).
For the flattering ruffles at the knees I cut out a ring of latex with an inner circumference approximately the same size as the the circumference of the lower end of the skirt (make it some centimeters larger if you need). The diameter of the outer edge is 10cm larger then that of the inner one. Remember: The circumference of a circle is the diameter multiplied with π (3.1415).
I cut the ruffle ring open and glued it to the skirt, adding the neon edges for contrast. Latex Kitty has a good tutorial for creating ruffles.
For the creation I measured the circumferences of her body from the belly down to the knees (letting some room to allow walking) and divided each length by 4. Then I reduced the front seams by 5mm on each side at the hip and added that amount to the rear parts to give some extra space for the backside. These adjustments gave the skirt a perfect fit (you cannot see that on the photo, where the skirt is worn by Monique, not the customer).
For the flattering ruffles at the knees I cut out a ring of latex with an inner circumference approximately the same size as the the circumference of the lower end of the skirt (make it some centimeters larger if you need). The diameter of the outer edge is 10cm larger then that of the inner one. Remember: The circumference of a circle is the diameter multiplied with π (3.1415).
I cut the ruffle ring open and glued it to the skirt, adding the neon edges for contrast. Latex Kitty has a good tutorial for creating ruffles.
Subscribe to:
Posts (Atom)







