Bubblegum Combination and Pirate Skirt

I have been busy lately with some non-latex business, but I also finished a made-to-measure set of bubblegum lingerie: panties, bra and a pirate mini skirt.

The panties are basically another variant of the Polka Dot Zipper Panties, made of 0.35mm bubblegum latex with ruffles made of 0.25mm thick black latex rings.

[side note: the problem with Monique is that her mannequin body is not responsive to the soft and shaping tension of the latex garment, a real rubbergirl would benefit from. I hope, I can show you some live shots later.]

The bra is made of the same material with 10mm wide and 0.6mm thick latex shoulder straps. To allow the adjustment of the shoulder straps I added black plastic rings and sliders to the back.

The pattern files for both panties and bra can be found on my pattern page.

The pirate mini skirt is an additional garment that can be worn on top of the panties. On the photo you can still see a small band of the bubblegum latex and the panties' ruffles.

The skirt itself is made of a 40mm wide band of 0.25mm black latex with long ruffles made of the same material. The ruffles are created from two circles. The inner diameter of these circles is about 13cm (circumference of skirt divided by 2 times π) and the outer is about 40cm (inner diameter plus 2 times the desired length).

I also attached a small skull and bones applique cut from 0.35mm white latex (I found the same skull and bones theme on a lot of different web sites without any information on copyright. I hope I did not infringe the authors rights.).

I have also uploaded the mini skirt pattern to the pattern page.