Sunday, February 26, 2012

Making Small Latex Bows

This tutorial shows how I make small latex bows from 5mm wide stripes of bubblegum latex (0.35mm):

1. The piece of latex for the bow is 40mm long and 5mm wide. Clean and attach glue to both ends and the center area.

2. Flip one end to the middle with the help of a ruler or grid.

3. Flip the other end to the middle and use some talcum to avoid any unwanted sticking.

4. Take another strip and attach glue. Also attach glue to the center of the bow. Attach the end of the strip as seen on the photo.

5. Wrap the strip around the bow to give the bow the desired form. Cut the strip.

6. This is how the bows should look now

7. Take another two strips of length 30mm each and attach glue to one end (one front, one back)

8. Glue the both stripes together at the desired angle. I prefer ca. 60 degress.


9. Attach glue to the back of the bow and the stripes just glued together.

10. Glue the bow to the stripes and cut away the parts above the bow. Also cut the lower stripes to the desired form and length.

11. The finished bows.

There is also another tutorial on larger bows.

Please let me know, if my instructions work for you. And, let me see some pictures of your bows.

Thursday, February 16, 2012

Victorian Babe Elegy Ellem

Elegy Ellem is wearing zitronenröllchen latex underwear "Victorian Babe".

The photos are shot by Aerynn for an international book project on "Fetish Fashion" that will feature zitronenröllchen.




© Aerynn

Model: Elegy Ellem
Photo: Aerynn
Hair/MUA: Terri Capon
Hat: Apatico

Tuesday, February 14, 2012

1'o'3 Lions Bathing Suit

At least I can keep one promise. I still don't have any pictures to show from the 1'o'3 Lions xmas shooting and I'm really sorry about that. But here is the promised variant, a bathing suit.

And here's rogueFIVE's casting call for it:

WANTED!
zitronenröllchen needs a model who will fit in this nice latex bathing suit. If you want to get this TFP/TFCD job and promote zitronenröllchen and yourself, send your application with a sample photo to: latex@zitronenroellchen.com or get in touch via deviantart here or on zitronenröllchen's site or mine
Requirements: MUST fit into Size (EU) 34/36, max measurements are: Bust: 84 - 90, Waist: 55-65, Hips: 82 - 90 (no kidding - 90 is the MAX!). If you are into body art, please include all ink's/metal/implants which are VISIBLE when you would wear the suit. Hair & MUA will be on site, as well as two photographers. The location is something special and will be revealed, when you get the job (we promise, you will like it!)

Since we are based in Germany - it would be perfect if you are a) willing to travel (depending on the perfection of the fit, we are willing to pay you some expenses) or b) are located in Germany/Hassia (RheinMain-Area). The shooting will take place around April/May - depending on the local weather conditions (Yeah - we know you are willing to take a lot of inconvenience for wearing this cute piece of latex - BUT we dislike to much frost!)

So… that's it basically for now! Get in contact as soon as you are impressed - haha - seriously - we are waiting for your application!