Thursday, December 16, 2010

Don't Touch the Metal

I do not like attaching metal eyelets to my latex garments but still have to add some kind of opening/closing mechanism where needed. I'm open for suggestions.

For this collar I used two textile straps with snap fasteners and soaked them with liquid black latex (top left).

I cut them apart and glued them behind the latex collar (top right) and reinforced them with a small strip of latex.

 
The picture at the bottom shows the construction from the front side. When closed only the small pieces of the straps on the right are visible and give the garment an interesting look.

Here is a finished example that uses the same mechanism.

Saturday, December 11, 2010

A Merry Latex Xmas

I'm currently working on a super secret set of cute and kinky latex underwear that will be shot with a really stunning model. More soon.

Meanwhile xmas is coming closer, so I started to make some xmas tree decorations like the christmas ball (bauble) shown on the photo.

I took a regular christmas ball and dunked it into liquid black latex. I had to carry and turn it while drying to avoid tears.

The stars are hand-cut from 0.4mm bubblegum latex and glued to the balled after it has dried. I attached to glue only to the stars backside. I hope you like it.

A merry latex xmas to all the people out there.

Sunday, December 5, 2010

Lace Garter Belt

This garter belt is a sequel to my experiments with self made latex lace. The back and side parts are made from 0.4mm purple latex. The front part is created from a piece of net lace that I put onto a glass surface and soaked it with transparent liquid latex. The glass side gets really smooth and shiny when oiled.

The trims are cut from 0.25mm black latex with a rotary cutter with a special blade that cuts a wave form.

I have uploaded the pattern to the pattern page.